D-MAX D1SPEC Tie Rod End Ball Joint Type (30mm extension)

This tie rod end plays an important role in connecting the knuckle and the steering gear box. In recent years, the suspension of drift vehicles has mainly been extended with lower arms, resulting in a shortage of tie rods and ends. There are various parts that compensate for the extension, but this product, which extends the end by 30 mm, serves to make up for the lack of length without reducing strength. The grease that is normally contained in the boot ensures smooth movement and protects the ball joint. This tie rod end ball joint type uses a reinforced type boot, so it is possible to refresh it with the reinforced boot while retaining the neutral feeling of the stock.

■ Specifications

■ Material

■ Accessories

■ Compatible Models

*Cannot be installed on genuine suspension. Conditions apply for installation.
*Varies depending on vehicle model, but can only be installed when used in conjunction with our tie rod.
*This part is necessary when there are not enough tie rods or ends, such as short knuckles or extended lower arms.
*When installing on vehicles with genuine knuckles or genuine front lower arms, proper alignment adjustment may not be possible.
*Please check the screw diameter.
*Reinforced bellows bushings are used.
*Depending on the knuckle installed, it may interfere with the folded part of the genuine lower arm.
*Processing of the interfering part is required.