D-MAX 180SX Late Model Position & Blinker SET

■ Compatible vehicle models/models

■Material

*The lens part is easily scratched, so do not wipe it with a dry cloth.

■Specifications/Bulb　

*LED bulb included (amber color)
*Wiring included

■Installation

*Do not use anything other than the included LED bulbs and silicone sockets.
*In order to turn on the turn signals, the original wiring needs to be modified.
*For replacement, please perform the replacement work based on the Nissan maintenance manual.
*For lights such as taillights, the color and brightness of each light are specified in detail by the safety standards of the Road Transport Vehicle Act for the safe operation of automobiles.
　Never modify the light color or brightness.
*Most water leaks occur when the gasket between the body and the lamp is not installed correctly or the gasket is deteriorated.
*Please understand the role of the gasket (caulking) before installing.
*Before driving the car, be sure to check that all lights are working properly.
*Once the installation work is completed, be sure to check that all lights are working properly. Please store the removed original lamps carefully.
*If the lens becomes cloudy, the taillight is not sealed in order to ventilate the air inside. This is to release the heat generated from the lamp and
　keep the inside of the lamp in an optimal environment.
*The inside of the tail lamp is not sealed, so if it rains for a long time or the humidity is high, the inside may condense and the lens may become cloudy, but this is not abnormal.
*The cloudiness will disappear if you leave it for a while, but if you are concerned about the cloudiness, remove the tail lamp connector on a sunny day and leave it for a while.
*The packing (caulking) between the body and the lamp is a very important part in preventing water leakage. If deterioration or damage is confirmed when removing it,
　be sure to replace it with a new one.
*When installing this product, there may be a gap of several mm between the body and this product, but this is due to vehicle errors and installation errors, so it is not abnormal.